Notts Underfloor Guide All articles
Consumer Advice

The Two-Centimetre Problem: Door Thresholds and Floor Heights When UFH Comes to Notts Homes

Notts Underfloor Guide
The Two-Centimetre Problem: Door Thresholds and Floor Heights When UFH Comes to Notts Homes

The bit nobody puts on the mood board

Underfloor heating looks wonderfully simple in the brochure: a mat, a manifold, a warm floor and a smug feeling when the dog chooses your kitchen over the sofa. What the brochure tends to skip is the humble door. Add a heating system under the floor and that door may no longer close. The threshold may sit proud. The step from hallway to living room may become a little ledge that catches a sock, a toe or a hoover wheel.

This is not a Nottinghamshire-specific problem, but it does show up in plenty of local homes. Victorian terraces around Sherwood and Carlton often have tight doorways and uneven old floors. West Bridgford semis may have been extended more than once, leaving a patchwork of floor levels. New-builds in Edwalton or Rugby Road-style developments can have shallower door linings and very precise thresholds. In all of them, a few extra millimetres can matter.

The good news is that there are several ways to solve it. The better news is that you can decide which one you want before anyone starts lifting floorboards.

Why a warm floor is rarely just a warm floor

Underfloor heating needs somewhere to live. That might be a low-profile mat, a screed or a recessed tray. Each has a different depth, and each changes the floor level in a different way. On top of that comes the finished floor covering: tiles, engineered wood, vinyl, laminate or carpet. A 15mm engineered board and a 3mm vinyl are not the same animal when you are trying to keep a door swinging.

A typical low-profile electric system might add around 15mm to 20mm once the mat, adhesive and finished floor are included. A warm-water system in a screed can add much more unless it is designed around the existing structure. A recessed system can sit closer to the original level, but it needs the floor to be cut or built around, which is not always sensible in an older property.

That is why the useful question is not “how thick is the heating?” but “what will the finished floor height be, room by room?” Ask that early and you avoid a lot of staring at a door that will not latch.

The numbers to settle before work begins

Before any quote is signed, get the installer to mark up the likely finished floor level in each doorway. A simple pencil line on the door frame is worth more than a paragraph of marketing copy. Check the gap under every door that opens onto the heated area, including cupboards, understairs storage and the door to the garage if it is attached.

Also check the threshold between rooms. If the hallway stays cold and the kitchen becomes warm, a small step may appear at the doorway. That is not automatically a problem, but it should be a deliberate step with a proper threshold strip, not an accidental cliff edge. In homes with level-access showers or anyone unsteady on their feet, even a modest lip deserves serious thought.

It helps to write down the existing floor buildup: floorboards, chipboard, screed, tiles, underlay. If previous owners have tiled over tiles, as they sometimes do, the finished height may already be higher than you think. A Nottinghamshire installer who works on older housing stock will usually spot this quickly, but you can save time by flagging it.

Option one: keep the buildup low

Low-profile systems are the obvious first answer. They are often used in renovations because they add less height than a traditional screed. Some are electric mats, some are thin water-based panels. They can work well over a solid, flat subfloor, and they may allow existing doors to stay in place if the finished floor is kept thin.

But low profile does not mean no profile. The heating element, adhesive, self-levelling compound and finished floor all count. If you have a 35mm door gap and the new floor eats 20mm of it, you may still be fine. If the gap is 20mm to begin with, you will not be. Measure the actual gap under the door, not the height of the door itself.

This is also where floor coverings sneak up on people. A tile adds more than a vinyl. A thick carpet and underlay may not suit some UFH systems at all, and it will certainly change the threshold calculation. Decide the covering early, or ask the installer to quote for the one you actually intend to fit.

Option two: recess the system

A recessed tray or routed floor system can keep the finished floor closer to the original level. In simple terms, the heating sits down inside the floor rather than on top of it. That can be a neat solution in a hallway where you want a flush transition, or in a room where raising the floor would clash with a staircase or a fitted kitchen.

It is not a magic trick, though. Recessing means cutting or adapting the existing floor structure, and that depends on what is underneath. Old joists, asbestos-containing materials, hidden pipes and electric cables all need checking. In some homes, recessing is straightforward. In others, it is the sort of idea that looks clever until someone finds a joist running exactly where the tray needs to go.

Ask your installer whether the recess is genuinely part of the design or whether they are simply planning to screw a tray to the top and hope nobody notices the step. The difference should be visible in the quote.

Option three: adjust the doors and thresholds

Sometimes the simplest answer is to adjust the door rather than fight the floor. A carpenter can trim the bottom of a timber door, provided there is enough material and the door is not hollow-core in the wrong places. Fire doors need more care: trimming can affect their performance, and in flats or rented property you should not guess. A qualified joiner will know what is acceptable.

Threshold strips can bridge a small change in level and give a neat finish. They will not disguise a big step in a way that feels safe. If the height difference is more than a few millimetres, think about a ramped threshold or a different floor transition rather than a standard strip.

Also look at skirting boards and fitted furniture. Raising a floor can swallow the bottom of a skirting, make a kitchen plinth look wrong or leave a dishwasher that no longer slides out. These are not reasons to abandon UFH, but they are reasons to plan the room as a whole rather than just the floor.

What to raise with an installer before work starts

Ask for finished floor levels in every affected doorway, not just the heated room. Ask how the system handles the transition to unheated rooms. Ask who is responsible for door trimming and threshold strips: is it the heating installer, the flooring fitter or you? Ask what happens if the subfloor is out of level by 10mm across a doorway. And ask for the plan in writing, because “we will sort the threshold” is not a plan.

A warm floor is a lovely thing. A warm floor with a door that shuts, a threshold that sits flat and no surprise step in the hallway is better. In Nottinghamshire homes of all ages, that usually comes down to a few centimetres and a conversation that happens before the first bag of levelling compound is opened.

All Articles

Related Articles

The Warm-Floor Day Planner: Scheduling UFH Around Nottinghamshire Routines and Off-Peak Power

The Warm-Floor Day Planner: Scheduling UFH Around Nottinghamshire Routines and Off-Peak Power

Pressure Drop, Puddle, Panic: Who Pays When an Underfloor Heating Leak Shows Up in Nottinghamshire?

Pressure Drop, Puddle, Panic: Who Pays When an Underfloor Heating Leak Shows Up in Nottinghamshire?

Will Your Warm Floor Talk Back? A Noise Reality Check for Underfloor Heating in Notts Homes

Will Your Warm Floor Talk Back? A Noise Reality Check for Underfloor Heating in Notts Homes